|
Heid
Brushes
Telcomec
Teleco
ZF
Stromag
Monninghoff
Ortlinghaus
Binder
MWM
|
 |
|
|
 |
 |
 |
| |
Clutches and
Brakes: |
Pressure
operated
Pressure
operated - spring-actuated
|
 |
 |
Hydraulic
or pneumatic operated units offer
several advantages, such as high forces, short
actuating times and rugged operational features.
Owing to these qualities they fully comply with
safety specifications when used in heavy-duty
drives, presses and lifting gears.
Accessories: Sealings, oil-inlet
adaptors for
shaft connection, standard units
for pressure operation, pressure
regulation and pressure medium
supply.
|
| |
|
|
|
| |
Multi-Disk
Brakes: |
electromagnetic
operated
electromagnetic
operated - spring-actuated
|
|
 |
Brakes
of this design series feature a magnetic assembly
for stationary fitting.
Designs with inner driver permit encapsulation in
accordance
with protective system specifications.
Spring-actuated designs feature prominently in
safety brake
applications, due to the protection they offer
against
power supply breakdown and owing to their extremly
short
break closing time.
The range of application is further extended by
devices
for manual release and position signalizing.
Accessories: Serial resistor to
change-over voltage.
Inductive voltage protection device for
short time response.
|
| |
|
|
|
|
|
|
|
|
|
| |
Single-Face
Clutches and Brakes: |
electromagnetic
operated
electromagnetic
operated - spring-actuated
|
|
 |
Single-face
clutches are suited for efficient
power transmission in mechanical engineering.
Their range of application extends from the
actuation of drives in equipment operating
under varying loads to the accurate control of
work cycles requiring high actuating frequency.
The programme includes maintenance-free
pole-to-armature contact clutches and designs
for high-duty operation with adjustable air gap
as well as clutch/brake combinations and
reversing units.
Accessories: Protective
resistors, varistors.
Current intakes for all kinds of operation.
Electric equipment for short time response.
|
| |
|
|
|
|
|
| |
Clutches
and Brakes: |
Pressure
operated
Pressure
operated - spring-actuated
|
|
|
Hydraulic
or pneumatic operated units offer
several advantages, such as high forces, short
actuating times and rugged operational features.
Owing to these qualities they fully comply with
safety specifications when used in heavy-duty
drives, presses and lifting gears.
Accessories: Sealings, oil-inlet
adaptors for
shaft connection, standard units
for pressure operation, pressure
regulation and pressure medium
supply.
|
| |
|
|
|
|
| |
|
|
|
 |
 |
 |
|
